; generated by Slic3r 1.3.1-dev on 2018-10-24 at 20:22:02

; Print Config Notes: 
; I Created this config to test on Multiple models such as Aircraft, and Keyrings etc
; 
; external perimeters extrusion width = 0.44mm (3.10mm^3/s)
; perimeters extrusion width = 0.48mm (6.91mm^3/s)
; infill extrusion width = 0.48mm (3.14mm^3/s)
; solid infill extrusion width = 0.48mm (2.26mm^3/s)
; top infill extrusion width = 0.48mm (1.88mm^3/s)
; support material extrusion width = 0.44mm (6.76mm^3/s)

M190 S110 ; set bed temperature and wait for it to be reached
M104 S258 ; set temperature
G28 ; home all axes
G1 Z0.2 F5000 ; lift nozzle

M900 K200else}30endif}; Filament gcode
M109 S258 ; set temperature and wait for it to be reached
G21 ; set units to millimeters
G90 ; use absolute coordinates
M82 ; use absolute distances for extrusion
G92 E0
G92 E0
M106 S255
G1 Z0.300 F7200.000
G1 E-2.00000 F2400.00000
G92 E0
G1 X20.004 Y20.787 F7200.000
G1 E2.00000 F2400.00000
G1 F1800
G1 X21.753 Y19.328 E2.15217
G1 X25.000 Y18.464 E2.37660
G1 X175.000 Y18.464 E12.39741
G1 X177.243 Y18.861 E12.54958
G1 X179.213 Y20.004 E12.70175
G1 X180.672 Y21.753 E12.85393
G1 X181.536 Y25.000 E13.07836
G1 X181.536 Y175.000 E23.09917
G1 X181.139 Y177.243 E23.25134
G1 X179.996 Y179.213 E23.40351
G1 X178.247 Y180.672 E23.55568
G1 X175.000 Y181.536 E23.78011
G1 X25.000 Y181.536 E33.80092
G1 X22.757 Y181.139 E33.95309
G1 X20.787 Y179.996 E34.10526
G1 X19.328 Y178.247 E34.25744
G1 X18.464 Y175.000 E34.48186
G1 X18.464 Y25.000 E44.50268
G1 X18.861 Y22.757 E44.65485
G1 X19.974 Y20.838 E44.80301
G1 E42.80301 F2400.00000
G92 E0
G1 X25.700 Y25.700 F7200.000
G1 E2.00000 F2400.00000
G1 F1800
G1 X174.300 Y25.700 E11.92728
G1 X174.300 Y174.300 E21.85457
G1 X25.700 Y174.300 E31.78185
G1 X25.700 Y25.760 E41.70513
G1 X25.596 Y25.314 F7200.000
G1 X25.300 Y25.300 F7200.000
G1 F1800
G1 X174.700 Y25.300 E51.68586
G1 X174.700 Y174.700 E61.66659
G1 X25.300 Y174.700 E71.64731
G1 X25.300 Y25.360 E81.62403
G1 X25.686 Y25.404 F7200.000
G1 E79.62403 F2400.00000
G92 E0
M107
; Filament-specific end gcode
G1 E-1 ; retract 15mm
M104 S0 ; turn off temperature
M190 S0 ; Turn off temperature
G28 X0  ; home X axis
M84     ; disable motors

; filament used = 122.4mm (0.3cm3)
; total filament cost = 0.0

; avoid_crossing_perimeters = 1
; bed_shape = 0x0,200x0,200x200,0x200
; bed_temperature = 105
; before_layer_gcode = 
; between_objects_gcode = 
; bridge_acceleration = 0
; bridge_fan_speed = 100
; brim_connections_width = 0
; brim_width = 0
; complete_objects = 0
; cooling = 0
; default_acceleration = 0
; disable_fan_first_layers = 0
; duplicate_distance = 6
; end_filament_gcode = "; Filament-specific end gcode"
; end_gcode = G1 E-1 ; retract 15mm\nM104 S0 ; turn off temperature\nM190 S0 ; Turn off temperature\nG28 X0  ; home X axis\nM84     ; disable motors\n
; extruder_clearance_height = 20
; extruder_clearance_radius = 20
; extruder_offset = 0x0
; extrusion_axis = E
; extrusion_multiplier = 1
; fan_always_on = 1
; fan_below_layer_time = 20
; filament_colour = #FF0000
; filament_cost = 0
; filament_density = 0
; filament_diameter = 1.75
; filament_max_volumetric_speed = 13
; filament_notes = ""
; first_layer_acceleration = 0
; first_layer_bed_temperature = 110
; first_layer_extrusion_width = 200%
; first_layer_speed = 30
; first_layer_temperature = 258
; gcode_arcs = 0
; gcode_comments = 0
; gcode_flavor = reprap
; has_heatbed = 1
; infill_acceleration = 0
; infill_first = 0
; interior_brim_width = 0
; label_printed_objects = 0
; layer_gcode = 
; max_fan_speed = 95
; max_layer_height = 0.3
; max_print_speed = 80
; max_volumetric_speed = 0
; min_fan_speed = 100
; min_layer_height = 0.15
; min_print_speed = 5
; min_skirt_length = 0
; notes = I Created this config to test on Multiple models such as Aircraft, and Keyrings etc
; nozzle_diameter = 0.4
; only_retract_when_crossing_perimeters = 1
; ooze_prevention = 0
; output_filename_format = [input_filename_base].gcode
; perimeter_acceleration = 0
; post_process = 
; pressure_advance = 0
; printer_notes = 
; resolution = 0
; retract_before_travel = 2
; retract_layer_change = 0
; retract_length = 2
; retract_length_toolchange = 10
; retract_lift = 0
; retract_lift_above = 0
; retract_lift_below = 0
; retract_restart_extra = 0
; retract_restart_extra_toolchange = 0
; retract_speed = 40
; skirt_distance = 6
; skirt_height = 2
; skirts = 1
; slowdown_below_layer_time = 10
; spiral_vase = 0
; standby_temperature_delta = -5
; start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
; start_gcode = G28 ; home all axes\nG1 Z0.2 F5000 ; lift nozzle\n
; temperature = 258
; threads = 6
; toolchange_gcode = 
; travel_speed = 120
; use_firmware_retraction = 0
; use_relative_e_distances = 0
; use_set_and_wait_bed = 0
; use_set_and_wait_extruder = 0
; use_volumetric_e = 0
; vibration_limit = 0
; wipe = 0
; z_offset = 0
; z_steps_per_mm = 0
; adaptive_slicing = 0
; adaptive_slicing_quality = 75%
; dont_support_bridges = 0
; extrusion_width = 0
; first_layer_height = 0.3
; infill_only_where_needed = 1
; interface_shells = 0
; layer_height = 0.3
; match_horizontal_surfaces = 0
; raft_layers = 0
; regions_overlap = 0
; seam_position = nearest
; sequential_print_priority = 0
; support_material = 1
; support_material_angle = 0
; support_material_buildplate_only = 0
; support_material_contact_distance = 0.2
; support_material_enforce_layers = 0
; support_material_extruder = 1
; support_material_extrusion_width = 0
; support_material_interface_extruder = 1
; support_material_interface_extrusion_width = 0
; support_material_interface_layers = 3
; support_material_interface_spacing = 1
; support_material_interface_speed = 100%
; support_material_max_layers = 0
; support_material_pattern = pillars
; support_material_pillar_size = 2.5
; support_material_pillar_spacing = 10
; support_material_spacing = 5
; support_material_speed = 60
; support_material_threshold = 65%
; xy_size_compensation = 0
; bottom_infill_pattern = rectilinear
; bottom_solid_layers = 3
; bridge_flow_ratio = 1
; bridge_speed = 60
; external_perimeter_extrusion_width = 0
; external_perimeter_speed = 50%
; external_perimeters_first = 0
; extra_perimeters = 1
; fill_angle = 45
; fill_density = 40%
; fill_gaps = 1
; fill_pattern = 3dhoneycomb
; gap_fill_speed = 20
; infill_every_layers = 1
; infill_extruder = 1
; infill_extrusion_width = 0
; infill_overlap = 35%
; infill_speed = 25
; min_shell_thickness = 0
; min_top_bottom_shell_thickness = 0
; overhangs = 1
; perimeter_extruder = 1
; perimeter_extrusion_width = 0
; perimeter_speed = 55
; perimeters = 3
; small_perimeter_speed = 15
; solid_infill_below_area = 60
; solid_infill_every_layers = 0
; solid_infill_extruder = 1
; solid_infill_extrusion_width = 0
; solid_infill_speed = 18
; thin_walls = 1
; top_infill_extrusion_width = 0
; top_infill_pattern = rectilinear
; top_solid_infill_speed = 15
; top_solid_layers = 3